Increase comfort and streamlining.

Our High Flow Angle Adapter attaches between the regulator second stage and its’ low pressure hose, routing the hose down the diver’s chest and/or under the arm.

The Rec Series is a hybrid wing that can be worn on single or double tanks, making it one of our most popular wings.

When diving a single tank, our Gusset Control System streamlines the wing, keeping it close to the body. This avoids the “taco” effect of the wing wrapping around the tank, away from the diver, which diminishes buoyancy control. Available in single or dual bladder, the Rec Series has 45 pounds (20.4 kg) of lift and can accommodate two 85 cubic foot (12 L) backmounted cylinders.

Divers may choose from our durable 1680 ballistic nylon EXP material or our even more rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, with a 1680 ballistic nylon divers side panel. Both the Rec EXP (Model BC 4300) and Rec XT (Model 5300) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder.

As a part of our modular BCD system, it can be matched with either a TransPac® XT, Transplate, or any metal backplate and webbing harness.

A lightweight wing designed for single-tank, warm water diving, our Travel series of wings are small-profile and ideal for travel and divers who wear a minimal amount of weight. At 25 pounds (11.3 kg) of lift, the Travel wing can accommodate one 80 cubic foot (12 L) tank with no more than 16 pounds of additional weight.

With its’ donut-shape, the Travel wing provides greater stability and control in the water. Donut-style or 360 degree wings promote an even volume of inflation on top, sides, and bottom, which improves buoyancy control and promotes a more efficient, horizontal trim.

Divers may choose from our durable 1680 ballistic nylon EXP material, available in four different color combinations, or our even more rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, with a 1680 ballistic nylon diver’s side panel. Both the Travel EXP (Model BC 4100) and Travel XT (Model 5100) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder. They are backed by our Worry-Free Lifetime Guarantee and are made exclusively in the USA.

As a part of our modular BCD system, the Travel Series wing can be matched with a TransPac® XT, Transplate, or any metal backplate and webbing harness.

Designed solely for double tanks and with the option of a single or dual bladder, the Classic XT provides 60 pounds (27.2 kg) of lift, which can accommodate two 104 cubic foot (17 L) backmounted cylinders and two 80 cubic foot (11 L) stage bottles.

Supporting heavy doubles and stage bottles is one thing, but being able to properly balance and stabilize that amount of heavy gear for proper trim while swimming is where the Classic XT really shines. The donut-shape design provides excellent stability and control while diving by keeping a volume of inflation on the top, sides, and bottom. This, along with an optional integrated Gusset Control System (GCS) that reduces “taco” effect, promotes effective streamlining and puts buoyancy where it is most needed (throughout the torso supporting the weight of the tanks) for superior horizontal trim. The GCS is not like a bungee wing because it does not restrict airflow; instead, the GCS promotes added streamlining and buoyancy control, yet allows the wing to inflate to its’ full capacity.

Designed to handle the extremes, the Classic XT is built using our rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, along with a 1680 ballistic nylon diver’s side panel. Inside the SuperFabric® outer shell, a heavy-duty, 210 denier nylon laminated bladder enhances the ruggedness and superior performance of the Classic XT.

The Classic XT comes equipped with a choice of a 12- or 16-inch elbow or a 16-inch rapid exhaust (pull dump) along with an appropriate low-pressure inflation hose. It also has two sets of marine-grade 316 stainless steel grommet mounting holes for attaching the wing to a harness and set of tanks.

As a part of our modular BCD system, the Classic XT can be matched with either a TransPac® XT, Transplate, or any metal back plate and webbing harness.

The Classic XT is backed by our Worry-Free Lifetime Guarantee and are made exclusively in the USA.

The Rec Series is a hybrid wing that can be worn on single or double tanks, making it one of our most popular wings.

When diving a single tank, our Gusset Control System streamlines the wing, keeping it close to the body. This avoids the “taco” effect of the wing wrapping around the tank, away from the diver, which diminishes buoyancy control. Available in single or dual bladder, the Rec Series has 45 pounds (20.4 kg) of lift and can accommodate two 85 cubic foot (12 L) backmounted cylinders.

Divers may choose from our durable 1680 ballistic nylon EXP material or our even more rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, with a 1680 ballistic nylon divers side panel. Both the Rec EXP (Model BC 4300) and Rec XT (Model 5300) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder.

As a part of our modular BCD system, it can be matched with either a TransPac® XT, Transplate, or any metal backplate and webbing harness.

The stainless steel assembly screws are used for attaching various accessories to a TransPac harness or to a hard backplate (such as lift bag pouches, suit inflation mounting systems and sidemount buttplates). They can also be used to attach an aircell to your TransPac (caution: may scratch tank paint). Designed to fit through a 3/8” hole, the Stainless Steel Assembly Screws include O-rings that create friction to help keep the screw in place. Sold as a set of two.

All Dive Rite backplates are laser cut and individually finished by hand.

This attention to detail ensures that there will be no rough, jagged edges that could potentially damage harness or accessory webbing. The XT backplate uses an 11 gauge, low carbon and rust resistant 316 L grade stainless steel. Weighing in at 6.5 pounds (2.9 kg), stainless steel plates are a popular option for divers looking for a more even distribution of ballast weight.

Not your average backplate.

The next generation of lightweight backplates has arrived. Dive Rite has taken the reliability of the stainless steel backplate and combined it with the lightweight benefits of non-stainless steel backplates.

The Backplate Comfort Pad's high-tech design consists of molded foam contoured in all the right places to prevent uncomfortable pokes and prods when wearing a metal backplate. Mesh airflow channels provide instant draining topside and resist compression allowing the pad to maintain its thickness and comfort at depth. Using hook-and-loop straps to secure to the shoulders of a harness, the Backplate Comfort Pad can be easily added or removed without the need to disassemble the harness. It will fit any standard backplate or harness.

Save time switching between singles and doubles.

Our Single Tank Adapter is constructed of marine grade 304 stainless steel and fits squarely in the opening of our Travel and Voyager series wings. For divers who frequently switch between double tank and single tank rigs, the STA is the answer. It is also a convenient way to attach cam straps to a hard metal backplate that does not have tank band slots. Includes two rubber non-slip cam strap pads and all hardware required to mount STA to a backplate.

Note: STA does not include cam straps.

Experienced divers all carry spares and tools; in fact o-rings and zip ties are often our best friends. Based on designs from the motorcycle industry, our Tech Tool Bag has been specifically tailored to carry all the essentials to save a dive in a compact roll-up design. A separate zippered compartment makes sure o-rings, port plugs and other necessities pieces stay put. Throw one in your dive bag or suitcase and you’ll always have what you need to fix a leaky reg or tune up your rebreather on the fly.

Join your tanks together, as they were intended to be.

Dive Rite Doubles Tank Bands are TIG welded with beveled edges to minimize tank scratching during assembly. They are constructed of 18-gauge, corrosion resistant 304 stainless steel, with a #3 polished finish and 11-gauge, 304 stainless steel structural plates. Every band is precision sheared and punched. Stringent quality control tests during each step of the manufacturing process ensure a premium product. Our bands include stainless steel bolt kits made from 304 stainless steel.

Keep your gear within reach.

When sidemounting stage tanks or bailout bottles, standard buttplate rails can be difficult to reach. We solved this problem with our Tech Buttplate. The rectangular shape with rails placed on the outer edges makes gear easy to access, even in a backmount rebreather or large doubles. The Tech Buttplate can be mounted to a harness by using either the two 2-inch webbing loops or using the two included stainless steel assembly screws.

Powerful, reliable, and simple.

The BX2 is everything that a top-notch diving light should be. Building on the highly rated BX1, the BX2 incorporates the latest LED technology into a stronger and more refined package. The CREE XP-L High Intensity LED and smooth reflector produce a crisp, tight hot spot ideal for signaling or peering under a reef ledge, while still providing a wide halo of light with enough side spill to light up a room.

Tech info:
- 1000 LED lumens.
- Beam: 6 degrees.
- Burn Time: 1+ hour at peak brightness, 3+ hours total.
- Depth Rating: 492 ft (150 m).
- Battery: User-replaceable 3500mAh 18650 Li-Ion with built in micro-USB charger (included).
- LED: Cree XP-L HI with 10,000 hour burn life.
- Weight: 9 oz (255 g) with battery and lanyard.
- Dimensions: 5.2 in (13.23 cm) x 1.65 in (4.19 cm).
- Includes battery, charging cable, wrist lanyard, and carrying case.

The low-profile, 1.5-inch cam strap (BC 2036-1.5) is a popular option for rigging sidemount or stage bottles. Using a low-profile marine grade stainless steel roller cam buckle, the 1.5-inch wide strap is 36-inches (91.4 cm) long and is user adjustable to fit cylinders from 5-inches (12.7 cm) in diameter up to 8-inches (20.3 cm) in diameter. Rubber non-slip pad prevents the cylinder from shifting once the cam strap is secured. Excess webbing is secures using hook-and-loop, which will also prevent the buckle from accidentally coming open.

The stainless steel cam strap with roller buckle (BC 2035) uses a 2-inch wide nylon webbing with marine grade stainless steel buckle. 36-inch (91.4 cm) webbing length is suitable for cylinders from 6.9-inches (17.5 cm) to 8-inches (20.3 cm) in diameter, which includes them most popular sizes of cylinders. Nylon rollers on the cam strap protect the cylinder from being scratched by the buckle, while a rubber non-slip pad prevents the cylinder from shifting once the cam buckle has been secured. Excess webbing is secured using hook-and-loop, which will also prevent the buckle from accidentally coming open. This cam strap comes standard on all Transpac XT, VoyagerPac, and TravelPac systems.

The plastic buckle cam strap is a popular option for applications where trimming every ounce possible from gear is necessary. It includes a rubber non-slip pad to prevent the cylinder from shifting once the cam strap has been secured. Excess webbing is secured using hook-and-loop, which will also prevent the buckle from accidentally coming open.

The stainless steel cylinder clamp uses a unique "speed" worm gear, which allows the diver to quickly adjust the clamp with less effort. Marine grade stainless steel cylinder clamps and hardware are saltwater ready and resistant to corrosion.

The stainless steel cylinder clamp uses a unique "speed" worm gear, which allows the diver to quickly adjust the clamp with less effort. Marine grade stainless steel cylinder clamps and hardware are saltwater ready and resistant to corrosion.

The Compact SPG is a great alternative for divers that want a lightweight SPG for traveling, sidemount bottles, or stage bottles.

A polycarbonate face and a nickel plated brass body reduce the weight of the Compact SPG by 43% compared to our Mini Tech SPG. A clean, black and white face means the Compact SPG is easy to read. This naked gauge has a 1.75-inch (44.5 mm) diameter with a 1.5-inch (38 mm) face (RG 2740-NH).

A Bourdon tube gauge, the Compact SPG is calibrated to 5000 PSI in 100 PSI increments (360 Bar in 10 Bar increments) for the highest level of accuracy. A luminescent dial makes it easier to read in low light situations.

Comes standard as a naked SPG with a spool to attach a hose swivel to the gauge. A boot is available as a separate option, if desired. The Compact SPG is suitable for oxygen service and is CE approved.

Replacement corrugated inflator hoses for the Dive Rite right corrugated inflator hoses. Available in 12”, 16” and 22”.

Replacement corrugated inflator hoses for the Dive Rite right corrugated inflator hoses. Available in 12”, 16” and 22”.

Replacement corrugated inflator hoses for the Dive Rite right corrugated inflator hoses. Available in 12", 16" and 22".

The 1-Inch crotch strap is ideal for divers using smaller wings, where a thicker strap would add unnecessary bulk. The 1-inch (25mm) crotch strap comes with a slide release buckle for convenient adjustment, and a sewn in scooter ring. Nylon webbing provides strength, yet won’t dig into the body.

Our 1.5-Inch Quick Release Crotch Strap is a welcome change to dated industry standards. The slide release buckle lets divers adjust on-the-fly, while the 1.5-inch strap provides greater comfort than the standard 1-Inch, especially when scootering.

Our 1.5-Inch Quick Release Crotch Strap is a welcome change to dated industry standards. The slide release buckle lets divers adjust on-the-fly, while the 1.5-inch strap provides greater comfort than the standard 1-Inch, especially when scootering.

Used for fastening a harness and backplate securely to a diver’s body, the 2-inch crotch strap is used to reduce the likelihood of gear slipping upwards on the body in the water. A continuous piece of nylon webbing provides strength, yet is soft and won’t dig into the body. Includes a neoprene sleeve to protect exposure suit from abrasion.

The CX2 handheld light has been completely redesigned to provide incredible power and versatility for all of your underwater adventures. The Luminous SST40 LED paired with a smooth reflector produces an impressive 1700 lumens at max output in a crisp and usable 8-degree, fixed focus beam. Powerful enough for the most demanding technical divers with a sleek ergonomic design and compact size ideal for travel.

The single head-mounted push button provides a simple and intuitive user interface. Quickly toggle through four power levels plus a strobe mode. The button is also illuminated with a color LED indicating the level of battery charge, so you’ll never have any surprises.

The CX2 is powered by an (included) high quality, user-replaceable 5000 mAh 21700 battery providing up to 2.75 hours of burn time on high. Alternatively, a battery adapter sleeve included with the light allows it to use any protected 18650 batteries that you may already own.

The light body comes pre-drilled and tapped to accept the Dive Rite QRM mounting system for secure mounting to any Dive Rite QRM handmount (not included). Includes a wrist lanyard, USB-C charging cord, and EVA foam clamshell case.

The Dive Rite DIN to Yoke Adapter is made to temporarily adapt a DIN First Stage Regulator to a Yoke Tank Valve. This is very common among technical divers when doing recreational diving. The adapter is marked with a 232 bar rating. The black finish matches the Dive Rite regulators.

Every detail of the ergonomic Dive Rite Finger Spool has been designed with performance, comfort, and ease-of-use in mind.

Smooth and compact, the width and diameter of the spool have been optimized to fit perfectly in your hand. The inner corners have been rounded, allowing the spool to spin freely between the finger and thumb when deploying line. Lightly scalloped edges provide a secure grip and concave sides make it easy to wind the line without winding up your fingers. The 60’ spool length is ideal for making jumps or gaps in a cave or shooting an SMB.

Every detail of the ergonomic Dive Rite Finger Spool has been designed with performance, comfort, and ease-of-use in mind.

Smooth and compact, the width and diameter of the spool have been optimized to fit perfectly in your hand. The inner corners have been rounded, allowing the spool to spin freely between the finger and thumb when deploying line. Lightly scalloped edges provide a secure grip and concave sides make it easy to wind the line without winding up your fingers. The 60’ spool length is ideal for making jumps or gaps in a cave or shooting an SMB.

The best choice for divers looking for a high performance blade fin.

Updated in 2020, the XT Fin has a new POM swivel buckle that allows for easier donning and adjustment. The XT’s monoprene blend offers the best balance of power to work ratio, providing efficient finning in high flow or stiff currents. The blade shape is designed for a wide variety of kicks, including frog kicks, modified flutter kicks, and power kicks. They are stiff but with plenty of snap and are lighter than traditional rubber fins, meaning your legs and feet won’t cramp even after miles of swimming.

All of the performance and reliability you have come to expect from our XT1 First Stage Regulator is now available in a sleek, fixed turret design.

The FT1 is the perfect first stage for open water, sidemount, or rebreather use. Simple and compact, the FT1 has work of breathing performance on par with the premier regulators on the market. Rugged construction and the use of black diamond-like carbon brass mean that this regulator will continue to look good as it performs no matter what you throw at it.

Flat low pressure and high pressure ports allow hoses to run straight out from the side of the regulator for more streamlined hose routing. All ports are angled 90 degrees from the DIN/yoke fitting for ideal hose routing.

A webbing harness designed for hard backplates that provides comfort alongside streamlining. Swivel points on the shoulder straps ensure a perfect fit, which is especially important for women, as well as men with broad shoulders. A chest strap holds the harness securely in place. Two-inch (50mm) nylon webbing provides strength, yet is soft and won’t dig into the body. Harness is adjustable by cutting off excess webbing once diver has sized the harness to his or her body. Standard two-inch webbing allows for customization with a wide variety of pockets and accessories, depending on the needs and desires of the individual diver. Includes marine-grade stainless steel hardware.

Note: Backplate not included.

Soon to be your favorite hat, the Dive Rite Old Favorite Trucker Hat features a low profile unstructured crown with a mesh back. A fully curved curved visor give its classic feel and a snap back closure adjusts to fit a wide range of sizes.

The Dive Rite Old Favorite Trucker comes in a distressed black color with the logo in antiqued colors to match the retro look.

Rugged hose for heavy-use applications. Specifically for connecting to a standard BC power inflator.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant. The Rubber BC Inflator Hose is designed specifically to connect to a BC power inflator nipple.

Rugged hose for heavy-use applications. Specifically for connecting to a standard BC power inflator.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant. The Rubber BC Inflator Hose is designed specifically to connect to a BC power inflator nipple.

Rugged hose for heavy-use applications. Specifically for connecting to a standard BC power inflator.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant. The Rubber BC Inflator Hose is designed specifically to connect to a BC power inflator nipple.

Rugged hose for heavy-use applications. Specifically for connecting to a standard BC power inflator.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant. The Rubber BC Inflator Hose is designed specifically to connect to a BC power inflator nipple.

Rugged hose for heavy-use applications. Specifically for connecting to a standard BC power inflator.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant. The Rubber BC Inflator Hose is designed specifically to connect to a BC power inflator nipple.

Rugged, low pressure hoses for heavy-use applications.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant.

Rugged, low pressure hoses for heavy-use applications.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant.

Rugged, low pressure hoses for heavy-use applications.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant.

Rugged, low pressure hoses for heavy-use applications.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant.

Rugged, low pressure hoses for heavy-use applications.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant.

Rugged, low pressure hoses for heavy-use applications.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant.

Rugged hose designed specifically to connect to an SPG.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant. The Rubber HP Hose is designed specifically to connect to a submersible pressure gauge (SPG) with the use of an air spool.

Rugged hose designed specifically to connect to an SPG.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant. The Rubber HP Hose is designed specifically to connect to a submersible pressure gauge (SPG) with the use of an air spool.

Rugged hose designed specifically to connect to an SPG.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant. The Rubber HP Hose is designed specifically to connect to a submersible pressure gauge (SPG) with the use of an air spool.

Rugged hose designed specifically to connect to an SPG.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant. The Rubber HP Hose is designed specifically to connect to a submersible pressure gauge (SPG) with the use of an air spool.

Rugged hose designed specifically to connect to an SPG.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant. The Rubber HP Hose is designed specifically to connect to a submersible pressure gauge (SPG) with the use of an air spool.

Braided hoses have become the favorite for many divers due to their extreme flexibility and lighter weight. More flex comes in handy for certain hose routing and can reduce jaw fatigue.

Braided hoses have become the favorite for many divers due to their extreme flexibility and lighter weight. More flex comes in handy for certain hose routing and can reduce jaw fatigue.

Braided hoses have become the favorite for many divers due to their extreme flexibility and lighter weight. More flex comes in handy for certain hose routing and can reduce jaw fatigue.

Braided hoses have become the favorite for many divers due to their extreme flexibility and lighter weight. More flex comes in handy for certain hose routing.

Braided hoses have become the favorite for many divers due to their extreme flexibility and lighter weight. More flex comes in handy for certain hose routing and can reduce jaw fatigue.

Braided hoses have become the favorite for many divers due to their extreme flexibility and lighter weight. More flex comes in handy for certain hose routing.

Braided hoses have become the favorite for many divers due to their extreme flexibility and lighter weight. More flex comes in handy for certain hose routing and can reduce jaw fatigue.

Braided hoses have become the favorite for many divers due to their extreme flexibility and lighter weight. More flex comes in handy for certain hose routing.