Made of marine-grade 316 stainless steel, our heavy-duty bolt snaps are designed for saltwater use and feature swiveling bases for ease of connection. Each bolt snap is meticulously inspected at our factory to ensure smooth edges that won’t cut fingers and that gates open and shut reliably.

Made of marine-grade 316 stainless steel, our heavy-duty bolt snaps are designed for saltwater use and feature swiveling bases for ease of connection. Each bolt snap is meticulously inspected at our factory to ensure smooth edges that won’t cut fingers and that gates open and shut reliably.

Made of marine-grade 316 stainless steel, our heavy-duty bolt snaps are designed for saltwater use and feature swiveling bases for ease of connection. Each bolt snap is meticulously inspected at our factory to ensure smooth edges that won’t cut fingers and that gates open and shut reliably.

Made of marine-grade 316 stainless steel, our heavy-duty bolt snaps are designed for saltwater use and feature swiveling bases for ease of connection. Each bolt snap is meticulously inspected at our factory to ensure smooth edges that won’t cut fingers and that gates open and shut reliably.

A clean, black and white face means the Mini Tech SPG is easy to read. This naked gauge has a 2-inch diameter with a 1.75-inch face (RG 2762-NH).

A Bourdon tube gauge, the Tech SPG is calibrated to 5000 PSI in 100 PSI increments (360 Bar in 10 Bar increments) for the highest level of accuracy. A tempered glass face is impact and scratch resistant, while the luminescent dial makes it easier to read in low light situations.

Comes standard as a naked SPG with a spool to attach a hose swivel to the gauge. A boot is available as a separate option, if desired. The Mini Tech SPG is suitable for oxygen service and is CE approved.

Displaying pressures up to 5000 PSI in 1000 PSI increments and 350 bar on the same face, our 1-inch Button SPG is ideal for use with pony, Argon, and bailout bottles when all you need is an indication of full or empty. A simple white face makes reading pressures easy.

Note: Remember to pressurize the regulator prior to submerging in water. Otherwise, water can enter the regulator, cause corrosion in the regulator and 1-inch Button SPG, which diminishes the life of the SPG. While pressurizing, it is important to look away from the gauge for protection in the unlikely event of a failure.

Keep It Simple, Do It Right.

Appealing to the minimalist diver, this Hogarthian kit includes everything needed to properly setup a streamlined stage or deco bottle.

The strap consists of braided nylon line with a black rubber fuel hose cover for abrasion protection. At each end of the strap, a medium bolt snap is used for clipping the tank off to the diver’s harness. A stainless steel “speed” clamp sheathed in tubular nylon webbing secures the bottom of the strap to the tank. A premium Dive Rite EPDM hose retainer is included to keep hoses managed while not in use.

The Watch That Transforms You.
Full Colour. High Resolution. AMOLED.

Intuitive controls and menu navigation along with a bright, vivid colour display. With a high degree of customization, the Teric brings divers a timepiece and dive computer of unprecedented capabilities.

The TransPac XT is Dive Rite’s flagship harness, originally designed by CEO Lamar Hires for his early expeditions to the remote karst regions of Japan. He needed a rugged harness system that would allow him to utilize backmounted doubles and a single tank, as well as sidemount in some of the smaller passages. The TransPac is not only an incredibly versatile diving tool, it was also designed to be comfortable enough to hike tanks through thousands of feet of dry cave passage.

Dive the TransPac XT Harness with a single tank, backmounted doubles, sidemount, or with a rebreather by simply swapping out the wing along with some additional mounting accessories. The TransPac is compatible with any XT or EXP wing in the Dive Rite line. Add accessories like gear pockets, weight pockets, a line cutter, knife, or additional D-rings with ease.

Dive Rite valves are chrome-plated brass for rugged protection and durability. Double o-ring seals provide redundancy as well as better shock absorption. Ribbed rubber handwheels are tough, yet easy to open and close. The left valve paired with the right valve can be used for independent doubles, a doubles manifold, sidemount, and rebreather cylinders. The valve is modular so divers can use them independently on single tanks, put them together to form an H-valve, or use an isolation bar to build a manifold for double tanks. All Dive Rite valves come standard with 3500 psi (242 bar) working pressure relief disks, are built with oxygen compatible o-rings and lubricants, and are Nitrox ready up to 40 percent.

All Dive Rite valves are easily converted between DIN and yoke by using an included DIN to yoke insert. The insert is installed and removed with an 8 mm hex key.

Note: The Left Valve is the most commonly used valve for single-tank open water diving.

Dive Rite valves are chrome-plated brass for rugged protection and durability. Double o-ring seals provide redundancy as well as better shock absorption. Ribbed rubber handwheels are tough, yet easy to open and close. The right valve paired with the left can be used for independent doubles, a doubles manifold, sidemount, and rebreather cylinders. The valve is modular so divers can use them independently on single tanks, put them together to form an H-valve, or use an isolation bar to build a manifold for double tanks. All Dive Rite valves come standard with 3500 psi (242 bar) working pressure relief disks, built with oxygen compatible o-rings and lubricants, and are Nitrox ready up to 40 percent.

All Dive Rite valves are easily converted between DIN and yoke by using an included DIN to yoke insert. The insert is installed and removed with an 8 mm hex key.

The H adapter evolved from the Y valve. Originally produced by Sherwood in the 80s, the dual outlet Y valve for yoke regulators allowed divers to do limited overhead penetration while still having two independent regulator systems for redundancy. The H adapter is the latest generation of dual outlet single tank diving.

The H adapter screws into the crossbar outlet of the K valve so a second regulator can be attached for technical diving. The H adapter is available in 200 bar only and equipped with shock absorbing ribbed rubber knobs that are rugged, yet easy to manipulate. As an integrated part of the valve, no relief disks are necessary. All Dive Rite valves come with Viton o-rings and oxygen compatible lubricants and are Nitrox ready up to 40 percent.

Turn your secondary light into a video light.

Turn your BX2 or CX2 Handheld Light into the perfect video light. Easily pop on the diffuser to allow for optimal lighting for video. Quickly go from a standard beam to a video-friendly beam with the same light.

Turn your primary light into a video light.

Using your corded or handheld primary light for underwater video? If so, then you’ll want to add a light diffuser to your video equipment bag. The video light diffuser widens the beam angle of light, which prevents hotspots and evenly distributes light across your subject. It also helps to reduce shadows, allows for better contrast, and stops the overpowering of light in any one area. Using the video diffuser allows you to take better video with little added expense.

The Video Diffuser for Primary Lights is compatible with current LX20, HP50, and EX35 lights. It also works with most of Dive Rite’s older fixed focus lights, including the RX and MR11 series.

This video diffuser can easily be attached and removed underwater and stays secured to your light with the provided lanyard.

Consistent gas flow regardless of depth and tank pressure.

The XT1 is Dive Rite’s balanced, swivel turret design first stage regulator. With a work of breathing of less than one joule per liter, the XT1 performs alongside the leading regulators on the market today.

Five low pressure ports and a swivel turret result in optimal hose routing. High pressure ports are angled 90 degrees from the DIN/yoke fitting, which creates the perfect angle for hose routing.

Breathe better underwater with Dive Rite’s high performance second stage regulator.

The XT2 Second Stage is Dive Rite’s workhorse regulator, consistently improving divers’ underwater experiences since 2013. With a work of breathing of less than one joule per liter, the XT2 performs alongside the leading regulators on the market today.

The XT2 Second Stage features a pneumatically-balanced design with consistent gas pressure to allow for easy inhalation. The Venturi Effect was utilized in the design of this regulator to direct airflow from the valve directly to the mouthpiece, resulting in the smoothest possible inhalation.

An “easy grip” dive/pre-dive switch allows the diver to avoid free flow at the surface and works well even with gloves. The adjustable design helps the diver fine tune cracking pressure so breathing resistance is customizable to the diver’s preference.