Increase comfort and streamlining.

Our High Flow Angle Adapter attaches between the regulator second stage and its’ low pressure hose, routing the hose down the diver’s chest and/or under the arm.

The stainless steel assembly screws are used for attaching various accessories to a TransPac harness or to a hard backplate (such as lift bag pouches, suit inflation mounting systems and sidemount buttplates). They can also be used to attach an aircell to your TransPac (caution: may scratch tank paint). Designed to fit through a 3/8” hole, the Stainless Steel Assembly Screws include O-rings that create friction to help keep the screw in place. Sold as a set of two.

Save time switching between singles and doubles.

Our Single Tank Adapter is constructed of marine grade 304 stainless steel and fits squarely in the opening of our Travel and Voyager series wings. For divers who frequently switch between double tank and single tank rigs, the STA is the answer. It is also a convenient way to attach cam straps to a hard metal backplate that does not have tank band slots. Includes two rubber non-slip cam strap pads and all hardware required to mount STA to a backplate.

Note: STA does not include cam straps.

Experienced divers all carry spares and tools; in fact o-rings and zip ties are often our best friends. Based on designs from the motorcycle industry, our Tech Tool Bag has been specifically tailored to carry all the essentials to save a dive in a compact roll-up design. A separate zippered compartment makes sure o-rings, port plugs and other necessities pieces stay put. Throw one in your dive bag or suitcase and you’ll always have what you need to fix a leaky reg or tune up your rebreather on the fly.

Join your tanks together, as they were intended to be.

Dive Rite Doubles Tank Bands are TIG welded with beveled edges to minimize tank scratching during assembly. They are constructed of 18-gauge, corrosion resistant 304 stainless steel, with a #3 polished finish and 11-gauge, 304 stainless steel structural plates. Every band is precision sheared and punched. Stringent quality control tests during each step of the manufacturing process ensure a premium product. Our bands include stainless steel bolt kits made from 304 stainless steel.

The stainless steel cylinder clamp uses a unique "speed" worm gear, which allows the diver to quickly adjust the clamp with less effort. Marine grade stainless steel cylinder clamps and hardware are saltwater ready and resistant to corrosion.

The stainless steel cylinder clamp uses a unique "speed" worm gear, which allows the diver to quickly adjust the clamp with less effort. Marine grade stainless steel cylinder clamps and hardware are saltwater ready and resistant to corrosion.

Soon to be your favorite hat, the Dive Rite Old Favorite Trucker Hat features a low profile unstructured crown with a mesh back. A fully curved curved visor give its classic feel and a snap back closure adjusts to fit a wide range of sizes.

The Dive Rite Old Favorite Trucker comes in a distressed black color with the logo in antiqued colors to match the retro look.

Tried and true EPDM hose retainers with modern twist.

The Dive Rite EPDM Hose Retainers are a must-have for any stage, deco, or sidemount bottle rigging. These slip-proof 1-inch wide hose retainers will withstand the test of time with their resistance to temperature, salt, chlorine, and anything else your diving environment has to offer. A nylon pull tab makes it easy to stretch the hose retainer, even with gloves.

The small hose retainer (GM2051-Small) will work on cylinders 4 to 5.5 inches in diameter. The large hose retainer (GM2051-Large) will work on cylinders 6.9 to 8 inches in diameter.

The Dive Rite Ceramic Blade Line Cutter makes safety simple.

No more rust, no more dulling. Versatile mounting options make sure your cutting tool is where you want it when you need it. Effortlessly slice through fishing line, braided nylon, bungee, neoprene and 2 inch webbing, as well as almost any other entanglement hazard you might encounter at the dive site. A worry-free shielded blade prevents accidental cuts. The last line cutter you’ll ever need.

An essential accessory for advanced and technical divers.

Personalize your gear with a splash of color. The Dive Rite Regulator Necklace is available in red, yellow, blue, pink, and tech black. Customizing the necklace length is fast and easy: simply tie an overhand knot at the desired length and trim the excess bungee. The knot recesses into the locking cone for a clean look. The necklace quickly installs onto the second stage by pulling both sides of the bungee to tighten the loop around the mouthpiece.

With lots of space and a lanyard for securing your valuable accessory items, the Vertical Zip Pocket carries everything you need on a dive.

Most dives require the ability to carry some type of accessory, such as a slate, safety reel, or cutting device. These accessories must be easily accessible and properly stowed when not in use. Adding the Bellows Vertical Zip Pocket (AC 3203) to your diving rig allows you to bring everything you need on a dive and remove the stress of losing your valuable gear.

Easily bring everything you need on a dive.

Sidemount divers require many tools for their diving but are limited by how much space they have to carry them. There is little room on the waist for traditional style pockets and tanks can limit access to thigh pockets. This lack of real estate has led many sidemount divers to go with a butt-mounted pocket.

The Dive Rite Neck Clip Choker makes clipping the cylinders easier and causes it to lay tighter against your body, increasing streaming lining of your deco bottles, stage bottles, or sidemount bottles and reducing dangling and drag. Dive Rite Chokers For Neck Clip comes in a set of two.

Keep your dive on schedule.

Our Wrist Slate offers three separate writing surfaces that flip up for easy access. An elastic cord snaps the leaves back into place and a cord with sleeve stows the attached solid carbon stick pencil. The Wrist Slate fits on the curve of the forearm and can be attached with either the hook-and-loop strap or the shock cord included in the kit. Use them for note taking, back up deco schedules, or as a communication device.

The See Me Tube is a crucial piece of safety equipment for any open water diver.

Make yourself visible on the surface using Dive Rite’s bright orange See Me Tube. This SMT is easily inflated using an oral inflator and has a sealed design that prevents air from escaping at the surface. This SMT is also designed to be easy to pack up for storage. Utilize Dive Rite’s See Me Tube to relay your position in the water to your dive buddy or dive boat, ensuring a safer and more enjoyable dive experience.

Make your ascents safe and easy.

Rebreather divers and open circuit divers alike will appreciate our hybrid Surface Marker Tube. An oral/power inflator makes our SMT ideal for rebreather divers who do not have a regulator easily available for inflation. Likewise, a funnel-shaped, anti-spill baffle allows open circuit divers to inflate this SMT with a regulator. A standard over pressurization valve allows excess gas to vent during ascent and/or to depressurize the bag at the surface. Includes a built-in carrying sleeve.

Keep It Simple, Do It Right.

Appealing to the minimalist diver, this Hogarthian kit includes everything needed to properly setup a streamlined stage or deco bottle.

The strap consists of braided nylon line with a black rubber fuel hose cover for abrasion protection. At each end of the strap, a medium bolt snap is used for clipping the tank off to the diver’s harness. A stainless steel “speed” clamp sheathed in tubular nylon webbing secures the bottom of the strap to the tank. A premium Dive Rite EPDM hose retainer is included to keep hoses managed while not in use.