The Rec Series is a hybrid wing that can be worn on single or double tanks, making it one of our most popular wings.

When diving a single tank, our Gusset Control System streamlines the wing, keeping it close to the body. This avoids the “taco” effect of the wing wrapping around the tank, away from the diver, which diminishes buoyancy control. Available in single or dual bladder, the Rec Series has 45 pounds (20.4 kg) of lift and can accommodate two 85 cubic foot (12 L) backmounted cylinders.

Divers may choose from our durable 1680 ballistic nylon EXP material or our even more rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, with a 1680 ballistic nylon divers side panel. Both the Rec EXP (Model BC 4300) and Rec XT (Model 5300) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder.

As a part of our modular BCD system, it can be matched with either a TransPac® XT, Transplate, or any metal backplate and webbing harness.

A lightweight wing designed for single-tank, warm water diving, our Travel series of wings are small-profile and ideal for travel and divers who wear a minimal amount of weight. At 25 pounds (11.3 kg) of lift, the Travel wing can accommodate one 80 cubic foot (12 L) tank with no more than 16 pounds of additional weight.

With its’ donut-shape, the Travel wing provides greater stability and control in the water. Donut-style or 360 degree wings promote an even volume of inflation on top, sides, and bottom, which improves buoyancy control and promotes a more efficient, horizontal trim.

Divers may choose from our durable 1680 ballistic nylon EXP material, available in four different color combinations, or our even more rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, with a 1680 ballistic nylon diver’s side panel. Both the Travel EXP (Model BC 4100) and Travel XT (Model 5100) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder. They are backed by our Worry-Free Lifetime Guarantee and are made exclusively in the USA.

As a part of our modular BCD system, the Travel Series wing can be matched with a TransPac® XT, Transplate, or any metal backplate and webbing harness.

Designed solely for double tanks and with the option of a single or dual bladder, the Classic XT provides 60 pounds (27.2 kg) of lift, which can accommodate two 104 cubic foot (17 L) backmounted cylinders and two 80 cubic foot (11 L) stage bottles.

Supporting heavy doubles and stage bottles is one thing, but being able to properly balance and stabilize that amount of heavy gear for proper trim while swimming is where the Classic XT really shines. The donut-shape design provides excellent stability and control while diving by keeping a volume of inflation on the top, sides, and bottom. This, along with an optional integrated Gusset Control System (GCS) that reduces “taco” effect, promotes effective streamlining and puts buoyancy where it is most needed (throughout the torso supporting the weight of the tanks) for superior horizontal trim. The GCS is not like a bungee wing because it does not restrict airflow; instead, the GCS promotes added streamlining and buoyancy control, yet allows the wing to inflate to its’ full capacity.

Designed to handle the extremes, the Classic XT is built using our rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, along with a 1680 ballistic nylon diver’s side panel. Inside the SuperFabric® outer shell, a heavy-duty, 210 denier nylon laminated bladder enhances the ruggedness and superior performance of the Classic XT.

The Classic XT comes equipped with a choice of a 12- or 16-inch elbow or a 16-inch rapid exhaust (pull dump) along with an appropriate low-pressure inflation hose. It also has two sets of marine-grade 316 stainless steel grommet mounting holes for attaching the wing to a harness and set of tanks.

As a part of our modular BCD system, the Classic XT can be matched with either a TransPac® XT, Transplate, or any metal back plate and webbing harness.

The Classic XT is backed by our Worry-Free Lifetime Guarantee and are made exclusively in the USA.

The Rec Series is a hybrid wing that can be worn on single or double tanks, making it one of our most popular wings.

When diving a single tank, our Gusset Control System streamlines the wing, keeping it close to the body. This avoids the “taco” effect of the wing wrapping around the tank, away from the diver, which diminishes buoyancy control. Available in single or dual bladder, the Rec Series has 45 pounds (20.4 kg) of lift and can accommodate two 85 cubic foot (12 L) backmounted cylinders.

Divers may choose from our durable 1680 ballistic nylon EXP material or our even more rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, with a 1680 ballistic nylon divers side panel. Both the Rec EXP (Model BC 4300) and Rec XT (Model 5300) are further enhanced with a heavy-duty, 210 denier nylon laminated bladder.

As a part of our modular BCD system, it can be matched with either a TransPac® XT, Transplate, or any metal backplate and webbing harness.

The stainless steel assembly screws are used for attaching various accessories to a TransPac harness or to a hard backplate (such as lift bag pouches, suit inflation mounting systems and sidemount buttplates). They can also be used to attach an aircell to your TransPac (caution: may scratch tank paint). Designed to fit through a 3/8” hole, the Stainless Steel Assembly Screws include O-rings that create friction to help keep the screw in place. Sold as a set of two.

All Dive Rite backplates are laser cut and individually finished by hand.

This attention to detail ensures that there will be no rough, jagged edges that could potentially damage harness or accessory webbing. The XT backplate uses an 11 gauge, low carbon and rust resistant 316 L grade stainless steel. Weighing in at 6.5 pounds (2.9 kg), stainless steel plates are a popular option for divers looking for a more even distribution of ballast weight.

Not your average backplate.

The next generation of lightweight backplates has arrived. Dive Rite has taken the reliability of the stainless steel backplate and combined it with the lightweight benefits of non-stainless steel backplates.

The Backplate Comfort Pad's high-tech design consists of molded foam contoured in all the right places to prevent uncomfortable pokes and prods when wearing a metal backplate. Mesh airflow channels provide instant draining topside and resist compression allowing the pad to maintain its thickness and comfort at depth. Using hook-and-loop straps to secure to the shoulders of a harness, the Backplate Comfort Pad can be easily added or removed without the need to disassemble the harness. It will fit any standard backplate or harness.

Save time switching between singles and doubles.

Our Single Tank Adapter is constructed of marine grade 304 stainless steel and fits squarely in the opening of our Travel and Voyager series wings. For divers who frequently switch between double tank and single tank rigs, the STA is the answer. It is also a convenient way to attach cam straps to a hard metal backplate that does not have tank band slots. Includes two rubber non-slip cam strap pads and all hardware required to mount STA to a backplate.

Note: STA does not include cam straps.

Keep your gear within reach.

When sidemounting stage tanks or bailout bottles, standard buttplate rails can be difficult to reach. We solved this problem with our Tech Buttplate. The rectangular shape with rails placed on the outer edges makes gear easy to access, even in a backmount rebreather or large doubles. The Tech Buttplate can be mounted to a harness by using either the two 2-inch webbing loops or using the two included stainless steel assembly screws.

The low-profile, 1.5-inch cam strap (BC 2036-1.5) is a popular option for rigging sidemount or stage bottles. Using a low-profile marine grade stainless steel roller cam buckle, the 1.5-inch wide strap is 36-inches (91.4 cm) long and is user adjustable to fit cylinders from 5-inches (12.7 cm) in diameter up to 8-inches (20.3 cm) in diameter. Rubber non-slip pad prevents the cylinder from shifting once the cam strap is secured. Excess webbing is secures using hook-and-loop, which will also prevent the buckle from accidentally coming open.

The stainless steel cam strap with roller buckle (BC 2035) uses a 2-inch wide nylon webbing with marine grade stainless steel buckle. 36-inch (91.4 cm) webbing length is suitable for cylinders from 6.9-inches (17.5 cm) to 8-inches (20.3 cm) in diameter, which includes them most popular sizes of cylinders. Nylon rollers on the cam strap protect the cylinder from being scratched by the buckle, while a rubber non-slip pad prevents the cylinder from shifting once the cam buckle has been secured. Excess webbing is secured using hook-and-loop, which will also prevent the buckle from accidentally coming open. This cam strap comes standard on all Transpac XT, VoyagerPac, and TravelPac systems.

The plastic buckle cam strap is a popular option for applications where trimming every ounce possible from gear is necessary. It includes a rubber non-slip pad to prevent the cylinder from shifting once the cam strap has been secured. Excess webbing is secured using hook-and-loop, which will also prevent the buckle from accidentally coming open.

Replacement corrugated inflator hoses for the Dive Rite right corrugated inflator hoses. Available in 12”, 16” and 22”.

Replacement corrugated inflator hoses for the Dive Rite right corrugated inflator hoses. Available in 12”, 16” and 22”.

Replacement corrugated inflator hoses for the Dive Rite right corrugated inflator hoses. Available in 12", 16" and 22".

The 1-Inch crotch strap is ideal for divers using smaller wings, where a thicker strap would add unnecessary bulk. The 1-inch (25mm) crotch strap comes with a slide release buckle for convenient adjustment, and a sewn in scooter ring. Nylon webbing provides strength, yet won’t dig into the body.

Our 1.5-Inch Quick Release Crotch Strap is a welcome change to dated industry standards. The slide release buckle lets divers adjust on-the-fly, while the 1.5-inch strap provides greater comfort than the standard 1-Inch, especially when scootering.

Our 1.5-Inch Quick Release Crotch Strap is a welcome change to dated industry standards. The slide release buckle lets divers adjust on-the-fly, while the 1.5-inch strap provides greater comfort than the standard 1-Inch, especially when scootering.

Used for fastening a harness and backplate securely to a diver’s body, the 2-inch crotch strap is used to reduce the likelihood of gear slipping upwards on the body in the water. A continuous piece of nylon webbing provides strength, yet is soft and won’t dig into the body. Includes a neoprene sleeve to protect exposure suit from abrasion.

A webbing harness designed for hard backplates that provides comfort alongside streamlining. Swivel points on the shoulder straps ensure a perfect fit, which is especially important for women, as well as men with broad shoulders. A chest strap holds the harness securely in place. Two-inch (50mm) nylon webbing provides strength, yet is soft and won’t dig into the body. Harness is adjustable by cutting off excess webbing once diver has sized the harness to his or her body. Standard two-inch webbing allows for customization with a wide variety of pockets and accessories, depending on the needs and desires of the individual diver. Includes marine-grade stainless steel hardware.

Note: Backplate not included.

Rugged hose for heavy-use applications. Specifically for connecting to a standard BC power inflator.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant. The Rubber BC Inflator Hose is designed specifically to connect to a BC power inflator nipple.

Rugged hose for heavy-use applications. Specifically for connecting to a standard BC power inflator.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant. The Rubber BC Inflator Hose is designed specifically to connect to a BC power inflator nipple.

Rugged hose for heavy-use applications. Specifically for connecting to a standard BC power inflator.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant. The Rubber BC Inflator Hose is designed specifically to connect to a BC power inflator nipple.

Rugged hose for heavy-use applications. Specifically for connecting to a standard BC power inflator.

Rubber hoses have been the industry standard for decades. Preferred by some divers for their extreme ruggedness, the stiffer rubber also makes them kink resistant. The Rubber BC Inflator Hose is designed specifically to connect to a BC power inflator nipple.

Braided hoses have become the favorite for many divers due to their extreme flexibility and lighter weight. More flex comes in handy for certain hose routing and can reduce jaw fatigue.

Braided hoses have become the favorite for many divers due to their extreme flexibility and lighter weight. More flex comes in handy for certain hose routing and can reduce jaw fatigue.

Braided hoses have become the favorite for many divers due to their extreme flexibility and lighter weight. More flex comes in handy for certain hose routing and can reduce jaw fatigue.

Braided hoses have become the favorite for many divers due to their extreme flexibility and lighter weight. More flex comes in handy for certain hose routing and can reduce jaw fatigue.

Braided hoses have become the favorite for many divers due to their extreme flexibility and lighter weight. More flex comes in handy for certain hose routing and can reduce jaw fatigue.

Braided hoses have become the favorite for many divers due to their extreme flexibility and lighter weight. More flex comes in handy for certain hose routing and can reduce jaw fatigue.

The second generation Nomad LS continues to be one of the most versatile sidemount systems on the market. Its’ unique design makes it capable of easily handling steel or aluminum cylinders. Utilizing a diamond shaped bladder with zero lift baffles, the Nomad LS allows the diver to trim out in a horizontal position with minimal adjustment. The extremely durable exterior SuperFabric™ material is resistant to the elements of diving, whether diving on a quiet reef, pushing deep into a cave system, or scooting through a deck opening on a wreck dive.

When sidemounting stage tanks or rebreather bailout bottles, buttplate rails can be difficult to access if backmounted gear covers them up. Problem solved with our Tech Buttplate. This is the version that comes standard on the Dive Rite Nomad XT or Nomad LS sidemount wings from Dive Rite.

The TransPac XT is Dive Rite’s flagship harness, originally designed by CEO Lamar Hires for his early expeditions to the remote karst regions of Japan. He needed a rugged harness system that would allow him to utilize backmounted doubles and a single tank, as well as sidemount in some of the smaller passages. The TransPac is not only an incredibly versatile diving tool, it was also designed to be comfortable enough to hike tanks through thousands of feet of dry cave passage.

Dive the TransPac XT Harness with a single tank, backmounted doubles, sidemount, or with a rebreather by simply swapping out the wing along with some additional mounting accessories. The TransPac is compatible with any XT or EXP wing in the Dive Rite line. Add accessories like gear pockets, weight pockets, a line cutter, knife, or additional D-rings with ease.