The Dive Rite DIN to Yoke Adapter is made to temporarily adapt a DIN First Stage Regulator to a Yoke Tank Valve. This is very common among technical divers when doing recreational diving. The adapter is marked with a 232 bar rating. The black finish matches the Dive Rite regulators.

Make your ascents safe and easy.

Rebreather divers and open circuit divers alike will appreciate our hybrid Surface Marker Tube. An oral/power inflator makes our SMT ideal for rebreather divers who do not have a regulator easily available for inflation. Likewise, a funnel-shaped, anti-spill baffle allows open circuit divers to inflate this SMT with a regulator. A standard over pressurization valve allows excess gas to vent during ascent and/or to depressurize the bag at the surface. Includes a built-in carrying sleeve.

Dive Rite valves are chrome-plated brass for rugged protection and durability. Double o-ring seals provide redundancy as well as better shock absorption. Ribbed rubber handwheels are tough, yet easy to open and close. The left valve paired with the right valve can be used for independent doubles, a doubles manifold, sidemount, and rebreather cylinders. The valve is modular so divers can use them independently on single tanks, put them together to form an H-valve, or use an isolation bar to build a manifold for double tanks. All Dive Rite valves come standard with 3500 psi (242 bar) working pressure relief disks, are built with oxygen compatible o-rings and lubricants, and are Nitrox ready up to 40 percent.

All Dive Rite valves are easily converted between DIN and yoke by using an included DIN to yoke insert. The insert is installed and removed with an 8 mm hex key.

Note: The Left Valve is the most commonly used valve for single-tank open water diving.

Dive Rite valves are chrome-plated brass for rugged protection and durability. Double o-ring seals provide redundancy as well as better shock absorption. Ribbed rubber handwheels are tough, yet easy to open and close. The right valve paired with the left can be used for independent doubles, a doubles manifold, sidemount, and rebreather cylinders. The valve is modular so divers can use them independently on single tanks, put them together to form an H-valve, or use an isolation bar to build a manifold for double tanks. All Dive Rite valves come standard with 3500 psi (242 bar) working pressure relief disks, built with oxygen compatible o-rings and lubricants, and are Nitrox ready up to 40 percent.

All Dive Rite valves are easily converted between DIN and yoke by using an included DIN to yoke insert. The insert is installed and removed with an 8 mm hex key.

The H adapter evolved from the Y valve. Originally produced by Sherwood in the 80s, the dual outlet Y valve for yoke regulators allowed divers to do limited overhead penetration while still having two independent regulator systems for redundancy. The H adapter is the latest generation of dual outlet single tank diving.

The H adapter screws into the crossbar outlet of the K valve so a second regulator can be attached for technical diving. The H adapter is available in 200 bar only and equipped with shock absorbing ribbed rubber knobs that are rugged, yet easy to manipulate. As an integrated part of the valve, no relief disks are necessary. All Dive Rite valves come with Viton o-rings and oxygen compatible lubricants and are Nitrox ready up to 40 percent.

Breathe better underwater with Dive Rite’s high performance second stage regulator.

The XT2 Second Stage is Dive Rite’s workhorse regulator, consistently improving divers’ underwater experiences since 2013. With a work of breathing of less than one joule per liter, the XT2 performs alongside the leading regulators on the market today.

The XT2 Second Stage features a pneumatically-balanced design with consistent gas pressure to allow for easy inhalation. The Venturi Effect was utilized in the design of this regulator to direct airflow from the valve directly to the mouthpiece, resulting in the smoothest possible inhalation.

An “easy grip” dive/pre-dive switch allows the diver to avoid free flow at the surface and works well even with gloves. The adjustable design helps the diver fine tune cracking pressure so breathing resistance is customizable to the diver’s preference.